Mod Podge Hard Coat is a non-toxic, waterbase sealer, glue and finish. You can use this Mod Podge on wood, glass, furniture, terra cota, paper mache and more. It has a water resistant, quick build and hard finish. Apply with brush or sponge applicator and do not shake. Store at room temperature. While wet clean up with soap and water. Let cure for 4 weeks. Once cured, surface can be cleaned with a damp cloth. Tint your Mod Podge glue with acrylic paints, dry pigments, or watercolors. Add glitter, sand or beads into the bottle to give it a new texture.
Glue: Apply to the back of fabric or paper, then position on the surface. Smooth out any air bubbles from the center out and let dry.
Smooth satin finish: After gluing cut-outs, let dry 2 hours. Apply 2 thin coats over the entire surface. Let dry for 20 minutes between coats.
Built-up finish: Apply at least 5 coats and allow it to dry for 15-20 minutes between coats. Wet sand with 400# sandpaper until smooth and wipe dry. Polish with 0000# steel wool then wipe with a damp cloth. If desired apply more coats and wet sand again.
Mod Podge Hard Coat is made in the USA.