Plasti Zap Glue is specially formulated for use on plastic models but it will also work on other materials such as ABS plastics, vinyl, car moldings and other plastics. It has a consistency between regular Zap and Zap-a-Gap. 1/3 oz. Plasti Zap medium viscosity CA glue has a permanent bond and is non-flammable. This cyanoacrylate glue cures clean and clear and will not attack paint. The joint can be filed and sanded in approximately one minute, allowing for extra fast assembly.
Protect work surfaces and use with adequate ventilation.
Avoid contact with fabric and foam materials.
Point bottle away from face and body while opening.
To open, remove overlap and twist off reusable cap.
Use one drop per square inch on one surface.
Apply small drops to only one surface, then join the parts.
For large or long seams apply small drops 1/4 to 1/2 inches apart, one side only, along the entire seam, then connect the parts.
Join parts and hold for 20-30 seconds or until set.
Micro dropper tip can be used for precision application.
Recap tip after use and store upright in cool, dry area.
Contains ethyl cyanoacrylate. Be careful to keep your fingers away from the glued joints until cured, this glue will bond your skin instantly to your model. Avoid contact with clothing as can cause burn. For accidental eye contact, flush with water for 15 minutes, get medical attention for eye or internal contact. Wears off skin with water exposure.
Save when you buy in bulk quantities! Buy 12 or more and get a discount for buying in bulk.
Kit Kraft is a craft and hobby shop in the Los Angeles area and an online store that sells a large variety of arts and craft supplies. Whether it is bulk quantities of glitter to cover a fashion show runway, sculpting material for your art piece or crafting a gift to inspire a friend, our supplies are designed to help bring creative ideas to life.